Home > Products>Fluid Bed Dryer_Parameters of Fluid Bed Drying Machine

Fluid Bed Dryer_Parameters of Fluid Bed Drying Machine

Time:2015-08-03  Creator:Yi Du

    Summary of Fluid Bed Dryer:
    Fluid bed drying machine is the common one now.Component include Heater, fluidized bed, cyclone separator, bag filter, air blower, operating table.According to the nature of the material, can be choose a cyclone or bag filter.Fluid bed drying machine own many kinds.The common:Efficient fluid bed dryer, horizontal fluid bed dryer, vertical fluid bed dryer, fluid bed drier
    1 GFG Series Efficient of Fluid Bed Dryer
    The Principle:The material from the feed inlet into the host of the boiling dryer.The drying medium is heated to the host of the boiling dryer(the drying medium need filter).Hot air through the distribution plate contact with the material,water be evaporated in the process,The wet content of the waste gas is discharged from the top of the boiling bed.
    Advantages of GFG Series Efficient Fluid Bed Dryer
    ① The structure is round, there is no dead angle
    ② With the agitator hopper, so as to solve the channeling phenomenon of large moisture content in drying process
    ③ Discharge Conveniently,According to the design of flexible loading unloading equipment, standard discharge is discharged by turning
    ④ Drying Efficient,The general drying time is about 25 minutes, the drying effect is relatively uniform
    Parameters of GFG Series Fluid Bed Dryer

Project Model
Feeding kg 60 100 120 150 200 300 500 1000 
Fan blowing rate m3/h 2361 3488 4000 4901 6032 7800 10800  15000
Wind Pressure mmH2O 594 533 533 679 787 950 950  1200
Power kw 7.5 11 15 18.5 22 30 45  75
Power of Agitator kw 0.55 0.55 0.55 0.55 0.75 1.5  1.5  2.2
Speed rpm 11
Consumption kg/h 141 170 170 240 282 366 451 800 
Hours min 15-30
Height of host mm 2700 2900 2900 2900 3300 3800 4200 5800

 

    2 XF Series Horizontal Fluid Bed Dryer
    The Working Process of Horizontal Fluid Bed Dryer:Clean hot air distribution into bed body, wet material is formed by hot air boiling state.Due to the hot air contact to material, increase the process of heat and mass transfer, so in a short time can be dry.Continuous horizontal boiling dryer, the bed body of the bed body of the bed body is entered into the bed, and the bed body is automatically removed from the other end of the bed.The horizontal fluid bed dryer cooperate under negative pressure.
    Parameters of Horizontal Fluid Bed Drye

Project\Model

Drying Powerkg/h

Power of Fankw

Pressurepa

blowing ratem3/h

ingress

Max energyJ

         Feeding Type

XF10

10-15

7.5

5.5×103

1500

60-200

2.0×108

1、Star Feeder

2、Pneumatic transport

XF20

20-25

11

5.8×103

2000

60-200

2.6×108

XF30

30-40

15 

7.1×103

3850

60-200

5.2×108

XF50

50-80

30

8.5×103

7000

60-200

1.04×109

    3 FG Series Vertical Fluid Bed Dryer
    This is one of the equipments in the production process of solid preparation, which is widely used by the pharmaceutical industry.Vertical boiling drying equipment with many functions.This is mainly used in pharmaceutical, food, chemical industry, for the use of powder or granular material drying.The use of clean air dryer by convection heat exchanger, the air temperature rises to a certain temperature to host branch duct,The distribution of valve plate into the boiler, the material from the feeder into vertical boiling drying equipment.Material in the dryer to form a boiling state, hot air and material to carry out extensive contact, heat and mass transfer, in a short time to promote the evaporation of water in the material.
    FG Series Vertical Fluid Bed Dryer

FG Model 3 5 30 60 120 200 300 500 1000
Project Unit
Container Diameter mm 300 400 700 1000 1200 1400 1600 1800  2200
Volume L 12 22 100 220 420 670 1000 1500  2500
Throughput Minimum Kg/batch 1.5 4 15 30 80 100 150 250  500
Maximum Kg/batch 4 6 36 72 140 240 360 600  1100
Steam consumption Kg/batch 12 23 70 140 211 282 366 465  800
air supply m3/min 0.3 0.3 0.3 0.6 0.6 0.9 0.9 0.9  1.5
Fan power kw 2.2 4 5.5 11 18.5 22 30 45  75
Temp Normal Temp-120℃ auto-adjust
Recovery Rate % >99
Time min 15-30 (According to the material characters)
Humidity % -0.2 (According to the material characters)
Noise db ≤75
Height mm 2100 2300 2500 3000 3300 3800 4000 4800  6200

    4 FL Series Fluid Bed Dryer
    Working Principle:Material powder particles in the raw material container in a circular flow state(Fluid Bed),By after purified air is heated by the preheating and mixing, binder is sprayed into the spray solution, make several particle aggregation containing a binder aggregate, due to the hot air of the material continuous drying, moisture evaporation in the aggregate, adhesive is solidification, the process is repeated, forming the ideal and uniform porous spherical particles.
    Summary of FL Series Fluid Bed Drying Machine

c70ef65c31291d9a454f70ac3a422261111.jpg

    Picture of Fluid Bed Drying Equipment
Equipment Parameters of Fluid Bed Dryer
Producing Graph of Fluid Bed Dryer
Demo of Efficient Fluid Bed Dryer
Graph of Fluid Bed Dryer
    Recommend Related Reading:
Flash of Efficient Fluid Bed Dryer    Chlorine ether resin Drying Machine    Drawing(PDF) of Fluid Bed Dryer

Spray dryer Spray dryer’s summary:Spray drying technology in the process of forming and drying is the most widely used in liquid process.This proc

More>>

Parameter of SYH series three-dimensional mixing equipment Type SYH-5 SYH-15 SYH-50 SYH-1

More>>

Copyright © 1998 - 2015 Changzhou YI DU Drying Equipment Co., Ltd.. All Rights Reserved.
Telephone:+86 0519-88661307  Mobile:013809072359  Fox:+86 0519-88603272
Website:http://www.yidudrying.com/en/ Address:NO.188,Dongfang Road ,Hengshan Bridge,Changzhou,Jiangsu,China